Canon error 5100 is often categorized as a cartridge error. This means that whenever this Canon printer error occurs, there is something wrong with your printer's cartridges. In this article, we look at the best solutions you can try when getting this error.

 

How will you fix the canon error 5100 on your canon printer?

 

Resetting your cartridges:

 

Your ink cartridges are one of the most important parts of your Canon printer. Even a simple mistake with ink cartridges can cause the entire printer to come into disarray. If the cartridge is not properly installed in the printer, there is a high chance that the cartridge will trigger the error code 5100.You can make sure the cartridges are properly inserted into the printer by following the steps below:

 

•   First, you can disconnect your Canon printer from the AC adapter and unplug all USB connections.

•    You can open the printer's ink cartridge access door and remove the ink cartridges.

•    Then place the cartridge in the main compartment of the chip resetter.

•   You can make sure that the chip on the cartridge is aligned with the resetter's contact plates and that they both touch.

•   You can gently press and hold the cartridge for a moment.

•   Then the resetter will flash the LED several times to confirm contact with the cartridge chip.

•    Ensure you hold down the cartridge until the resetter lights up.

•  If the light is still on, remove the cartridge from the resetter.

•   Once you finish, Reinstall the cartridges in your printer, connect your USB back, and turn on your printer.

•  Finally, the Canon error 5100 should be resolved after resetting the cartridges.

 

Clean the printer strip:

 

If you get a chance to go into the depths of your Canon printer, you will definitely notice a white plastic band inside. This plastic strip is called a printing strip, usually at the top of the drive belt. You can get a Canon 5100 Printer Support Code when the printer strip is dirty.
Fortunately, cleaning the strip is the easiest way to fix this problem. All you have to do is turn on the printer and check if the printout is clean. If it is unclean, use a clean, dry cloth to wipe off any residue or dirt on the printing tab. Once you are done, the strip is now noticeably clean. 

 

Remove the jammed paper:

 

Paper jams are another problem that can cause your Canon printer to give you error code 5100. You will need to manually verify that a piece of paper is stuck in your printer to make sure it's not the cause.

 

•     First, you need to turn off the Canon printer and unplug the AC adapter.

•    Then remove the paper cover of your printer.

•     You can check if the paper is embedded in the cassette. If the paper is jammed, take it out.

•     Next, you can stop the “FINE Cartridge Holder.”

•     Then carefully slide the FINE cartridge holder and remove all the paper around the spot.

•     If there is jammed paper in the FINE Cartridge Holder slot is curled, carefully remove it with both hands.

•     Once you are sure you have removed all the jammed paper, close the paper output slot of your printer.

•     Then you can reload the paper and try using your printer normally. Finally, Canon error 5100 should be fixed.

 

Remove dust and debris from your printer:

 

As we mentioned earlier, Dust and debris getting inside your printer can cause a number of complications. You will need a soft dry cloth and rubbing alcohol to carefully clean the inside and fix Canon error 5100 printer problems. You can follow the steps below to clean your Canon printer effectively:

 

•   First, you can turn off the printer and unplug it from the power source.

•  You can use a soft, clean cloth to clean the exterior of your printer. This will avoid more debris getting into the printer when you start cleaning the interior.

• Once the cleaning is finished, you can Separate the clean and lint-free cloth, then put rubbing alcohol.

•  You need to use a damp cloth Clean the inside of your printer but make sure you don't force any hardware.

•   You can carry out cleaning with the utmost care.

•   If the error is fixed, Plug in the printer and try printing again.

 

Conclusion:

 

We have discussed different ways to fix Canon error 5100 on Canon printer models, as you have read. There are many reasons why your Canon printer might receive error code 5100. We are confident that we have helped you understand these reasons and effective solutions. So you can continue to use your printer. Make sure you use our guide to prevent your printer from getting error code 5100, and you may not encounter another error. And if the problem persists after trying the above solutions, please get in touch with Canon for further assistance.